A crack spreads, a patch grows, a ceiling stain turns out to be soft drywall that needs more than filler and paint.
Drywall repair pricing in Salt Lake City isn’t about a single hole or seam.
It’s shaped by access, finish level, texture matching, drying time, and how many visits the repair actually needs. We’ll break down drywall repair cost with realistic ranges, real examples, and what drives the final number.
Key Notes
Drywall repair pricing ranges from $125 to $2,600+ based on repair size and scope.
Water damage, structural cracks, and mechanical cuts significantly increase labor and finish complexity.
Most drywall repairs require multiple visits due to drying time, texture work, and paint blending.
Drywall Repair Cost Ranges in Salt Lake City
Based on local jobs, drywall repair cost in Salt Lake City typically falls into these ranges:
Small drywall repairs: $125–$450
Medium drywall repairs: $450–$900
Large drywall repairs or partial replacements: $900–$2,600+
Minimum service charges are common, even for small repairs. Setup, protection, materials, and cleanup take time regardless of patch size.
Drywall Repair Cost by Repair Size
Small Drywall Repairs
Small repairs include nail holes, minor dents, small anchor damage, and hairline cracks.
Typical cost range: $125–$450
What usually drives cost here:
Paint matching
Texture blending
Access (behind doors, tight hallways, stairwells)
Even when the patch is small, paint blending often extends beyond the repair area to avoid flashing.
Medium Drywall Repairs
Medium repairs include door handle holes, plumbing access cuts, partial ceiling damage, and larger wall sections.
Typical cost range: $450–$900
Why these cost more:
Often requires two or three visits
Texture matching becomes more noticeable
Ceiling repairs add time and setup
Large Drywall Repairs & Replacement Sections
Large repairs include removing and replacing entire drywall sections, ceiling panels, or multiple connected areas.
Typical cost range: $900–$2,600+
Project Example:
A basement wall and ceiling drywall replacement near a swamp cooler required three visits and totaled just over $1,300 including materials.
Drywall Repair Cost by Cause of Damage
Water Damage Drywall Repair Cost
Water damage adds complexity fast. Drywall often has to be removed, dried, and sometimes insulated again.
Cost drivers:
Moisture testing and removal
Insulation replacement
Mold prevention
Larger paint blending areas
Water damage drywall repair commonly lands between $600 and $1,500+, depending on spread and access.
Structural Cracks and Movement
Settlement cracks and recurring seams require reinforcement, not just surface repair.
Costs increase when:
Cracks need mesh or backing
Multiple seams are involved
Previous repairs failed
Mechanical Cuts (Plumbing, Electrical, HVAC)
Clean cuts still require finishing work.
Common issues:
Box extenders
Trim adjustments
Texture rebuilding
Mechanical cut repairs often fall in the $450–$1,000 range depending on size and finish level.
What Does Drywall Repair Include?
Drywall repair is rarely just “fill the hole and leave.” Even small patches involve a sequence of steps that have to happen in order.
Most Drywall Repairs Include:
Protecting floors, furniture, and nearby surfaces
Cutting back damaged drywall to solid edges
Installing backing or insulation if needed
Hanging new drywall or patch material
Taping joints
Applying multiple coats of joint compound
Drying time between coats
Sanding to a finish level that matches surrounding walls
Texture application if applicable
Primer and paint blending
That sequence explains why drywall repair often spans multiple visits and why labor makes up most of the cost.
Why Drywall Repairs Often Take Multiple Visits
Drywall mud needs time to cure. Rushing it leads to shrinkage, cracking, or visible patches.
A typical repair cycle:
Visit 1: Install drywall and first mud coat
Visit 2: Second coat and feathering
Visit 3: Sanding, texture, and prep
Visit 4 (sometimes): Paint and touch-ups
Project Example:
A four-visit drywall job totaled $2,640, driven by drying cycles, finish-level requirements, and material volume.
The scope included 9–10 drywall sheets, multiple corner beads, large-volume joint compound (all-purpose and topping), drywall tape, screws, and backing wood to properly anchor weak areas before finishing.
When Drywall Repair Turns Into a Bigger Project
Drywall repairs grow when:
Insulation is damaged
Backing is missing
Ceiling height complicates access
Texture matching requires repainting entire walls
Planning for this upfront prevents surprise costs.
How To Get A Drywall Repair Quote That Holds Up
For accurate pricing, provide:
Clear photos of the damage
Ceiling or wall location
Texture type
Paint age
Water history (if applicable)
Good quotes account for drying time, return visits, and finish blending.
Frequently Asked Questions
Can drywall repairs be blended so you can’t see them later?
Yes, but it depends on texture, lighting, and paint. Matching texture and feathering repairs takes time, and paint blending is often harder than the patch itself.
Is it cheaper to repair drywall before or after painting a room?
Before. Repairing drywall after paint usually means repainting larger sections to avoid visible flashing or sheen differences.
Why do some drywall repairs require multiple visits?
Joint compound needs proper dry time between coats. Rushing it leads to cracking, shrinkage, or visible seams that show once painted.
Does drywall repair affect home value or inspections?
Clean, professional repairs help during inspections, especially for water damage or settlement cracks. Poor patches are easy for inspectors to spot and often flagged.
Want An Exact Drywall Repair Price?
Licensed, insured, transparent pricing with flawless finishes.
Conclusion
Drywall repair cost in Salt Lake City comes down to damage size, finish expectations, and how many visits the repair needs.
Minor patches with sanding and paint often land in the $125–$450 range. Medium repairs with insulation, texture matching, and paint can push $450–$900. Larger repairs or multi-visit jobs, especially ceilings or water damage, commonly reach $900–$2,600 once drying cycles, materials, and labor stack up.
The biggest cost swings come from texture matching, access, and repeat trips – not the drywall itself.
If you want pricing that reflects the actual repair, finish, and number of visits your wall needs, a detailed quote gives you clarity before anything gets opened up or patched over. Get your quote now!
These cost ranges are meant to give you a realistic starting point. Every home and project is different, and final pricing depends on layout, materials, prep work, and job complexity. We provide clear, upfront pricing after reviewing your specific project.
